Welding
The cutting head is the central component of the laser cutting system and is located at the end of beam delivery where the laser beam is focused thru the lens.
Welding is one of the most critical operations in fabrication of sheet steel fabrication of assemblies. To some extent the strength of the assemblies depend on the quality of welding. Hence, we take utmost care in welding operation.
MIG Welding
Gas Metal Arc Welding (GMAW) is frequently referred to as MIG welding. MIG welding is a commonly used high deposition rate welding process. Wire is continuously fed from a spool. MIG welding is therefore referred to as a semiautomatic welding process.
Benefits
- All position capability
- Higher deposition rates than SMAW
- Less operator skill required
- Long welds can be made without starts and stops
- Minimal post weld cleaning is required
TIG Welding
Gas Tungsten Arc Welding (GTAW) is frequently referred to as TIG welding. TIG welding is a commonly used high quality welding process. TIG welding has become a popular choice of welding processes when high quality, precision welding is required.
Benefits
- Superior quality welds
- Welds can be made with or without filler metal
- Precise control of welding variables (heat)
- Free of spatter
- Low distortion
Supplying high quality, cost-effective solutions with strong after sale support to clients.
Enquiry NowContact usStick Welding
Shielded Metal Arc Welding (SMAW) is frequently referred to as stick or covered electrode welding. Stick welding is among the most widely used welding processes. The flux covering the electrode melts during welding. This forms the gas and slag to shield the arc and molten weld pool. The slag must be chipped off the weld bead after welding. The flux also provides a method of adding scavengers, deoxidizers, and alloying elements to the weld metal.
Benefits
- Equipment used is simple, inexpensive, and portable
- Electrode provides and regulates its own flux
- Lower sensitivity to wind and drafts than gas shielded welding processes
- All position capability
- We also have facilities & equipments for projection welding, Arc Welding CO2 welding.
Inquiry Now
Address
757, Makarpura G.I.D.C., Vadodara-390010, Gujarat, India.
Phone
+91 9662316296, 9727725573